This heavy-duty composition head gasket for iron or aluminum heads is teflon coated and has pre-flattened steel fire rings (this feature reduces head and deck surface galling). This gasket features a …

posted February 05, 2005 10:41 PM I WOULD LIKE SOME ADVICE ON WHICH HEAD GASKET TO USE WITH MY COMBO.406 , 10.2 COMPRESSION WITH A .039 HEAD GASKET THICKNESS …

Feb 25, 2002 · A touch low on antifreeze so I think it had a blown head gasket leaking a little water into a cylinder. Then it hydrauliced not letting it start. Then it bent a rod, allowing it to start but make the …

posted July 26, 2005 10:49 AM Alright i Have a 350 with vortecs and with the 64cc heads i should have 9:6 comp, but what size of head gasket is that with? Would it be worth a head gasket that might give …

posted October 16, 2005 09:12 PM Its possible it may be a warped head also. At least it could possibly be machined out if the head is not warped beyond limits if thats the case. Likely its a blown head …

Jan 6, 2006 · Very light casting head. If you want a good head with the same cc the 993 or 997 is a very good head. Casting 186, 492, 441, 041, 292, 126 are all real good heads with smaller cc. Some are …

I thought they sealed fine as long as you have a freshly milled head and block deck surface, like they were when coming down the assembley line at the factory. If you don't have everything miled when …

Jul 2, 2009 · 041's are a 1.94/1.50" valve 64cc head from the 1969 295hp 350 and the 1970 300hp 350,, same engine as none of the actual specs changed. The heads are better than low power crate …

posted May 10, 2005 12:54 AM likely those were factory gaskets, lots of the Chev V-8's from the early 80's, 70's, etc used the steel shim head gasket.

The oil would leak down the groove between the head and block (space the head gasket leaves) and sort of come around under the head and leak onto my fuel pump. Basically the same spot your is …